Logo ER-Soft

RuggedAir100

RuggedAir100
WiFi access point, client, repeater & Mesh point designed for industrial applications in harsh environments
Protocolos: PROFINET Ethernet/IP Modbus TCP WLAN

Características destacadas

  • All-in-one : AP/client/repeater/Mesh point
  • WiFi 802.11n (MIMO 2T2R), 2.4/5 GHz
  • Advanced security functions, VPN, firewall...
  • WaveManager centralized management software
  • Operating System : WaveOS
  • Rugged device : shocks & vibrations proof, IP66, dual insulated redundant input +9VDC to +48VDC or PoE
  • Fast roaming

Descripción

As its predecessor (WLg-ABOARD) with which it is compatible, RuggedAir100 is an "all-in-one" multifunction product (access point, client, repeater, router & Mesh point) designed for industrial applications in harsh environment (IP66 waterproof, shocks and vibrations proof, extended temperature range, M12 connectors...). It can be used either on the ground to create indoor or outdoor WiFi coverages, or on board to connect all types of mobile equipment or vehicles (trams, construction/agricultural machines, trucks, automated cranes, harbor cranes...) to the ground network.

  • Reliability : it is equipped with a redundant wide range (9-48 VDC) or POE power supply as well as 2 antennas making it possible to reinforce the quality of the radio link and to increase the throughputs.
  • Mobility : its roaming performances (<30 ms) and its shocks/vibrations resistance make it easy to integrate in any type of mobile equipment or vehicle.
  • Ease of deployment and maintenance : RuggedAir100 can be easily managed from the network with the centralized management software WaveManager, through SNMP or from a simple web browser. It also has a C-Key (key saving configuration) for instant replacement on site.
  • Security : it integrates advanced security standards (Firewall, VPN, 802.1X ...) as well as routing and filtering functions to facilitate mass deployments.
Technical characteristics
 

 

Ethernet interface

 

2-port Ethernet 10/100 auto-sensing, Base TX, auto MDI/MDIX, M12 D-coded Ethernet interface

 

  
 

 

WiFi interface

 

1 radio 802.11n (MIMO 2T2R, 300 Mbps), ANI (Adaptive Noise Immunity)

 

  
 

 

WiFi radio data rate

 

802.11a: 6, 9, 12, 18, 24, 36, 48 & 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 & 54 Mbps
802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)

 

  
 

 

Operating frequencies

 

ISM : 2.4-2.483 GHz (up to 14 channels)
UNII : 5.15-5.25 GHz (up to 4 channels)
UNII-2 : 5.25-5.35 GHz (up to 4 channels)
UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)
UNII-3 : 5.725-5.825 GHz (up to 4 channels)
Supports DFS and TPC

 

  
 

 

Output power

 

2,4 GHz : 23,5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)

 

  
 

 

Sensitivity max.

 

 

WiFi 802.11n receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n		  
 

 

Radio connectors

 

2 N-type connectors

 

  
 

 

Security

 

Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3

 

  
 

 

WiFi Modes

 

AP, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS

 

  
 

 

Ethernet networking

 

 

Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay

  
 

 

IP routing

 

 

Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router

  
 

 

Administration

 

http, https, SNMP agent (V1, V2C, V3), WaveManager administration software, save / restore configuration key (C-Key)

 

  
 

 

LEDs Signaling

 

Radio : activity - status | Ethernet : link - activity | Power : on-off | C-Key : activity

 

  
 

 

I/O

 

A 3-pin Waterproof M8 connector with :
- one solid state relay output warning (with configurable action), 1 Form A, 60VDC 80mA max
- one input for external device control 24VDC max

 

  
 

 

Power supply

 

+9VDC to +48VDC, redundant, PoE af (at type 1, mode A/endspan compatible), M12 connector 4-pole A-coded

 

  
 

 

Consumption

 

IDLE mode : 1.7 W / Maximum average : 3.92 W / Recommended : 6.5 W

 

  
 

 

Dimensions & weight

 

L : 175 x l : 80 x h : 75 mm (without connectors), weight TBD

 

  
 

 

Standards

 

CE (RED) & FCC (FCC ID : Z9W-RMB) certified
Safety : EN 62368-1:2014+A11, EN62311
Radio : EN 300 328 (2.4 GHz), EN 301 893 (5 GHz, DFS)
CEM : EN 301 489 [-1], [-17]
Environmental : EN61373 (shocks and vibration), EN60068 (climatic)

 

  
 

 

Environment

 

IP66
Operating : -40°C to +70°C , HR: 0-99%

 

  

Referencia Descripcion
RuggedAir100 WiFi access point, client, repeater & Mesh point designed for industrial applications in harsh environments
Si continuas utilizando este sitio aceptas el uso de cookies. más información