Logo ER-Soft

USB-16COM Plus

Características destacadas

  • Consists of 2xUSB-8COM Plus
  • 16 x RS232/422/485 ports
  • USB 2.0 High Speed interface
  • USB, serial ports and power supply ESD protected
  • Robust metal case
  • Ports configuration: via software or DIP-switch
  • Serial speed max. 1000(RS232) / 12000(RS485) kbps
  • 19-inch and Wall mounting options
  • External DCin 9-54V
  • Easy port expansion via USB-Out type A connector
  • Wide range operating temperature (-25°C - +75°C)

Descripción

The USB-16COM Plus actually is a combination of two USB-8COM Plus, mounted as a pair via a special Rack Mount kit. Both devices are connected via one USB cable, in essence the pair operates as one USB-COM Plus with 16 simultaneous serial ports.
As the separate modules the USB-16COM Plus adapter connects 16 x RS232 or RS422/485 devices to your PC by one USB 2.0 High Speed port. The serial ports, USB and the power supply are ESD protected, compliant to IEC 61000-4-2 (8kV contact/16kV air discharges). USB-8COM Plus may work in bus-powered mode on stronger than minimum ports, but a DCin connector for external wide range voltage is provided.

All serial ports support RS232, RS422 and RS485 in Full-/Half-Duplex operation modes. The operation modes of the serial ports are either configured by a single DIP switch common for all ports, or for each port individually by software. The configuration also activates built-in RS485 termination if required, no jumpers needed. Standard Drivers are available for all major operating systems.
The USB 2.0 High-Speed enables serial data rates of up to 12Mbps in RS422/485 or 1000kbps in RS232 modes. The device also allows every non-standard bitrate up to 3.5Mbps.

A USB-out (type A) connector at the rear side allows easy expansion of serial ports by simple concatenation of further USB-COM Plus modules; we call it "USB-Through" feature. All USB-COM Plus devices can be used to expand the serial ports for NetCom Plus Device Servers.

612 x 2 6694USB-8COM Plus (8x RS232/422/485, non-isolated, expandable)RK-NCP Mounting kit
Packing list

  • 2x USB-8COM Plus devices
  • RK-NCP Mounting kit for 19-inch rack
  • CD-ROM with configuration software

Options
6031DC Power supply adapter 12V @ 1A
6636-pin Terminal block adapter to DB9 female
661Serial Null-Modem adapter 9PF-9PF, change male to female
>Back to top

Especificaciones Tecnicas

USB Interface
USB-Input USB 2.0 High Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
USB-Out USB 2.0 High Speed, USB 1.1 compliant
Connector USB type A (at rear side)Used to connect more USB-(x)COM modules for port expansion.
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Serial Interface
Ports 16 x RS232/422/485 configurable by softwareRS485 Termination configurable by softwarePolarization/BIAS not requiredConnector DSub-9 maleFor configuration details see below ...
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 12MbpsRS485: up to 12Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)For configuration details see below ...
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration Either all ports operate in one common mode, configured by a single DIP switch, or each port is individually configured by a software: Windows: USB-COM Configuration UtilityAll OS: Terminal Emulation
Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
Power and Environment
Power Consumption Self powered: DCin 9 - 54V, 10WSum of both USB-COM Plus modules
DCin Supply DCin specs: Wide range 9 - 54V DC, 2x5WConnector: 3-pin industrial Terminal Block (Plus / Minus / Protective Earth)
DCin Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 437×147×44 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 1.9kg
Mounting 19-inch Rack
LEDs LEDs for Power, Ready, serial Tx, Rx

Referencia Descripcion
612x2 USB-8COM Plus (8x RS232/422/485, non-isolated, expandable)RK-NCP Mounting kit (USB-16COM-RM, USB-16COMi-RM)
Si continuas utilizando este sitio aceptas el uso de cookies. más información