| USB Interface | |
| USB-Input | USB 2.0 High Speed, USB 1.1 compliant |
| Connector | USB type B |
| Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
| USB-Out | USB 2.0 High Speed, USB 1.1 compliant |
| Connector | USB type A (at rear side)Used to connect more USB-(x)COM modules for port expansion. |
| Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
| Serial Interface | |
| Ports | 4 x RS232Connector DSub-9 male |
| Speed | 180bps - 921.6/1000kbps |
| Signals | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
| Software | |
| Driver | Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet |
| Power and Environment | |
| Power Consumption | Bus-powered: 5V 500mA via USBSelf-powered: DCin 9 - 54V, 3W |
| USB Supply | Bus-powered possible on standard USB ports. The DCin supply is compulsory to support USB-Out. It is also necessary for USB ports with lesser power output. |
| DCin Supply | DCin specs: Wide range 9 - 54V DC, 3WConnector: 3-pin industrial Terminal Block (Plus / Minus / Protective Earth) |
| DCin Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
| Dimension | 196×147×44 mm³ (W×L×H) |
| Operating Temp | −25°C - 75°C |
| Storage Temp | −30°C – 85°C |
| Case | SECC sheet metal (0.8mm) |
| Weight | 0.9kg |
| Mounting | 19-inch RackWall mount |
| LEDs | LEDs for Power, Ready, serial Tx, Rx |