USB-4COM Plus ISO

Características destacadas

  • 4 x RS232/422/485 ports
  • USB 2.0 High Speed interface
  • 2.5kV isolation per serial port
  • USB, serial ports and power supply ESD protected
  • Robust metal case
  • Ports configuration: via software or DIP-switch
  • Serial speed max. 1000(RS232) / 12000(RS485) kbps
  • 19-inch and Wall mounting options
  • Bus powered or ext. DCin 9-54V
  • Easy port expansion via USB-Out type A connector
  • Wide range operating temperature (-25°C - +75°C)

Descripción

The modern USB-4COM Plus ISO adapter connects 4 x RS232 or RS422/485 devices to your PC by one USB 2.0 High Speed port. The serial ports are individually isolated for 2.5kV. The serial ports, USB and the power supply are ESD protected, compliant to IEC 61000-4-2 (8kV contact/16kV air discharges). USB-4COM Plus ISO may work in bus-powered mode on stronger than minimum ports, but a DCin connector for external wide range voltage is provided.

All serial ports support RS232, RS422 and RS485 in Full-/Half-Duplex operation modes. The operation modes of the serial ports are either configured by a single DIP switch common for all ports, or for each port individually by software. The configuration also activates built-in RS485 termination if required, no jumpers needed. Standard Drivers are available for all major operating systems.
The USB 2.0 High-Speed enables serial data rates of up to 12Mbps in RS422/485 or 1000kbps in RS232 modes. The device also allows every non-standard bitrate up to 3.5Mbps.

A USB-out (type A) connector at the rear side allows easy expansion of serial ports by simple concatenation of further USB-COM Plus modules; we call it "USB-Through" feature. All USB-COM Plus devices can be used to expand the serial ports for NetCom Plus Device Servers.

611USB-4COM Plus ISO (4x RS232/422/485, isolated, expandable)
Packing list

  • USB-4COM Plus ISO device
  • Mounting brackets for 19-inch rack
  • Wallmount plates
  • CD-ROM with configuration software

Options
6031DC Power supply adapter 12V @ 1A
6636-pin Terminal block adapter to DB9 female
661Serial Null-Modem adapter 9PF-9PF, change male to female
>Back to top

Especificaciones Tecnicas

USB Interface
USB-Input USB 2.0 High Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
USB-Out USB 2.0 High Speed, USB 1.1 compliant
Connector USB type A (at rear side)Used to connect more USB-(x)COM modules for port expansion.
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Serial Interface
Ports 4 x RS232/422/485 configurable by softwareRS485 Termination configurable by softwarePolarization/BIAS not requiredConnector DSub-9 maleFor configuration details see below ...
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 12MbpsRS485: up to 12Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)For configuration details see below ...
Signals RS232: TxD, RxD, RTS, CTS, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GNDAll signals isolated for 2.5kV
Protection Galvanically isolated 2.5kVCompliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration Either all ports operate in one common mode, configured by a single DIP switch, or each port is individually configured by a software: Windows: USB-COM Configuration UtilityAll OS: Terminal Emulation
Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
Power and Environment
Power Consumption Bus powered: 5V 600mA via USBSelf powered: DCin 9 - 54V, 4W
USB Supply Most USB ports provide 600mA, more than the specification. Use the DCin supply otherwise, this is compulsory to support USB-Out.
DCin Supply DCin specs: Wide range 9 - 54V DC, 4WConnector: 3-pin industrial Terminal Block (Plus / Minus / Protective Earth)
DCin Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
LEDs LEDs for Power, Ready, serial Tx, Rx

Referencia Descripcion
611 USB-4COM Plus ISO (4x RS232/422/485, isolated, expandable) (USB-4COMi SI-M)
Si continuas utilizando este sitio aceptas el uso de cookies. más información