USB-8COM Plus
Características destacadas
- 8 x RS232/422/485 ports
- USB 2.0 High Speed interface
- USB, serial ports and power supply ESD protected
- Robust metal case
- Ports configuration: via software or DIP-switch
- Serial speed max. 1000(RS232) / 12000(RS485) kbps
- 19-inch and Wall mounting options
- Bus powered or ext. DCin 9-54V
- Easy port expansion via USB-Out type A connector
- Wide range operating temperature (-25°C - +75°C)
Descripción
The modern USB-8COM Plus adapter connects 8 x RS232 or RS422/485 devices to your PC by one USB 2.0 High Speed port. The serial ports, USB and the power supply are ESD protected, compliant to IEC 61000-4-2 (8kV contact/16kV air discharges). USB-8COM Plus may work in bus-powered mode on stronger than minimum ports, but a DCin connector for external wide range voltage is provided.
All serial ports support RS232, RS422 and RS485 in Full-/Half-Duplex operation modes. The operation modes of the serial ports are either configured by a single DIP switch common for all ports, or for each port individually by software. The configuration also activates built-in RS485 termination if required, no jumpers needed. Standard Drivers are available for all major operating systems.
The USB 2.0 High-Speed enables serial data rates of up to 12Mbps in RS422/485 or 1000kbps in RS232 modes. The device also allows every non-standard bitrate up to 3.5Mbps.
A USB-out (type A) connector at the rear side allows easy expansion of serial ports by simple concatenation of further USB-COM Plus modules; we call it "USB-Through" feature. All USB-COM Plus devices can be used to expand the serial ports for NetCom Plus Device Servers.
612 | USB-8COM Plus (8x RS232/422/485, non-isolated, expandable) |
Packing list |
|
Options | |
6031 | DC Power supply adapter 12V @ 1A |
663 | 6-pin Terminal block adapter to DB9 female |
661 | Serial Null-Modem adapter 9PF-9PF, change male to female |
>Back to top |
Especificaciones Tecnicas
USB Interface | |
USB-Input | USB 2.0 High Speed, USB 1.1 compliant |
Connector | USB type B |
Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
USB-Out | USB 2.0 High Speed, USB 1.1 compliant |
Connector | USB type A (at rear side)Used to connect more USB-(x)COM modules for port expansion. |
Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
Serial Interface | |
Ports | 8 x RS232/422/485 configurable by softwareRS485 Termination configurable by softwarePolarization/BIAS not requiredConnector DSub-9 maleFor configuration details see below ... |
Speed | RS232: 180bps - 921.6/1000kbpsRS422: up to 12MbpsRS485: up to 12Mbps |
Available Modes | RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)For configuration details see below ... |
Signals | RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND |
Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
Configuration | Either all ports operate in one common mode, configured by a single DIP switch, or each port is individually configured by a software: Windows: USB-COM Configuration UtilityAll OS: Terminal Emulation |
Software | |
Driver | Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet |
Power and Environment | |
Power Consumption | Bus powered: 5V 600mA via USBSelf powered: DCin 9 - 54V, 5W |
USB Supply | Most USB ports provide 600mA, more than the specification. Use the DCin supply otherwise, this is compulsory to support USB-Out. |
DCin Supply | DCin specs: Wide range 9 - 54V DC, 5WConnector: 3-pin industrial Terminal Block (Plus / Minus / Protective Earth) |
DCin Protection | Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge |
Dimension | 196×147×44 mm³ (W×L×H) |
Operating Temp | −25°C - 75°C |
Storage Temp | −30°C – 85°C |
Case | SECC sheet metal (0.8mm) |
Weight | 0.9kg |
Mounting | 19-inch RackWall mount |
LEDs | LEDs for Power, Ready, serial Tx, Rx |
Referencia | Descripcion |
---|---|
612 | USB-8COM Plus (8x RS232/422/485, non-isolated, expandable) (USB-8COM-M, USB-8COMi-RM, USB-8COM-PRO) |
Documentacion | Manual (Edition May 2016) |
Documentacion | USB-8COM Plus Datasheet |
Descargas | Driver (v2-12-18 June 2016) |
Descargas | Tools (May 2016) |