USBPort

Características destacadas

  • 2 or 4 ports 3-in-1 serial interface : RS232/RS4522/RS485 (1500V isolation)
  • Data rate from 300 Kbps to 3 Mbps on each port
  • RS485 automatic line direction control
  • Support for 4-wire RS422/RS485 and 2-wire RS485
  • Independent TxD & RxD signalling for each port
  • USB bus powered or from an external power source (+9VDC to +36VDC)
  • Hot “Plug & Play” support, USB 2.0 full speed and USB 1.1 compliant
  • Standard COM ports full compatible
  • 15 KV ESD protection and HF filtering
  • Robust  & compact metal case, CE standards, cabinet or 35 mm Din Rail mounting

Descripción

This new range of serial to USB solution (USBPort/x) offers performance, simplicity of installation, security, robustness and high reliability at affordable prices.

 

USBPort/x is proposed in two models : 2 and 4 isolated port with 3 in 1 serial interface RS232, RS422 & RS485 in order to cover all technical requirements of industrial environments.

 

USBPort/x installation is quite simple as the product is instantly plug & play, it doesn't require any IRQ, DMA or I/O port resources.

Installed serial ports are considered by Windows 2000, 2003, XP, VISTA, SEVEN & Linux operating systems as computer's standard COM ports.

 

USBPort supports up to 3 Mbps over the serial link. A decimal divider makes it possible the program non-standard highly accurate baud-rates.

 

Ordering information
    USBPort/2   Isolated 2-port RS232/RS422/RS485 serial Hub, power from USB bus or from an external power source +9VDC to +36VDC, 2 meter USB type A/B cable provided    
    USBPort/4   Isolated 4-port RS232/RS422/RS485 serial Hub, power from USB bus or from an external power source +9VDC to +36VDC, 2 meter USB type A/B cable and PWS-12 supplied    
    PWS-12   Optional external power source (+12VDC / 5.5W) for USBPort/2 (required when chaining several devices on the same USB port or when the USB HUB delivers less than 500 mA)    

Especificaciones Tecnicas

Interfaces 2 or 4 RS232 / RS422 / RS485 asynchronous serial ports for USB 2.0
RS signals RS232 mode : TxD, RxD, RTS, CTS, DCD, DTR, RI & GND RS422 mode : A, A’, B, B’ & GND - RS485 mode : AA’, BB’ & GND
Format Asynchronous 5, 6, 7 or 8 bits per character 1, 11/2, 2 stop bits Even, odd, mark, space or no parity
Data rate From 300 Kbps to 3 Mbps on each port
FIFOS TX: 128 bytes, RX: 384 bytes on each port
Hand-shake Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF) with automatic line direction control in the RS485 mode.
RS connectors 5-point screw-in terminal for each RS422/RS485 port, male SUB D9 connector for RS232
Protection 15KV ESD protection with HF signal filtering, CE standards
Isolation 1500Vrms optic isolation on RS422/RS485 serial ports
Signaling 2 LEDs per port to monitor TxD & RxD signals activity, one LED for power supply
Power supply USB bus powered of from an external power source (+9 to +36VDC) on jack or Phoenix connector. USBPort/x enables to chain other USB devices and thus power other USB equipments from the product.
Operating systems Windows 2000, 2003, XP, VISTA, SEVEN and Linux (please consult us for other OS)
Consumption 2.5W for the 2-port version, 3.5W for the 4-port version
Configuring "Plug & Play" equipment, quick & easy Windows installation, RS232 / RS422 / RS485 mode, polarization and line termination are switches configurable
EMC NF EN 55022 residential emission, NF EN 61000-6-2 industrial immunity
Environment Operating temperature from -40°C to +70°C, storage -40°C to +80°C, 0 to 95% relative humidity without condensation
Installation Metal case for panel mounting, 35 mm Din Rail mounting accessories available optionally
Dimensions USBPort/2: 168 mm (L) x 112 mm (W) x 26 mm (H) USBPort/4: 168 mm (L) x 112 mm (W) x 42 mm (H)
Weight 445 g for the 2-port version, 610 g for the 4-port version

Referencia Descripcion
USBPort/2 USBPort Isolated RS232/RS422/RS485 USB serial Hub
USBPort/4 USBPort Isolated RS232/RS422/RS485 USB serial Hub
Si continuas utilizando este sitio aceptas el uso de cookies. más información