VScom 800I UPCI

Características destacadas

  • Universal PCI 3.3 / 5.0V
  • 8x RS232, RS422/485
  • RS485 ART (Automatic Receive Transmit control)
  • RS485 in 6 operation modes
  • surge protection
  • PCI Plug and Play
  • IRQ Interrupt sharing, only one Interrupt per card
  • Drivers for Windows 95 to 7/2008 R2
  • Software compatibel with DOS, Windows 3.11, OS/2, Linux and div. Unix
  • Compact board size (half-size)
  • Hardware flow control
  • Built-in termination resistors

Descripción

The VScom 800I uPCI is designed for RS232, RS422/485 industrial communication. It supports 8 independent RS232, RS422 or RS485 ports. Each port can be configured separate.
Available modes : RS232, RS422 fullduplex
RS485 full duplex (4 wire)
RS485 half duplex (2 wire) with and without echo.
In RS485 modes applications enable transmission by simply sending data.
This is done by ART (Automatic Receive Transmit Control) intelligence.
The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. The common control by RTS is possible for compatibility.
In addition, hardware flow control and built-in termination resistors guarantee data integrity.
Surge protection is also available for RS232 Signals to deliver high reliability.
All of these features make VScom 800I uPCI suitable for harsh industrial applications.

Read the News Article…

Application
Multiport data acquisition Factory automation Remote serial device control Industrial control Embedded industrial machine SCADA
Part Number4441

Especificaciones Tecnicas

Hardware
I/O controller 8x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
Connector type 1x DB78 female, Cable 8 x DB9 male
Interface
Bus interface PCI version 2.1 (32bit) Universal PCI 3.3V / 5.0V
Serial interface RS232, RS422 / 485
No. of ports 8
Signals RS232 Tx, Rx, CTS/RTS, DTR, DSR, DCD, GNDRS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GNDRS485 Data+/-, GND
RS485 data control ART (Automatic Receive Transmit control)By RTS alternatively
Built-in termination resistor RS422 120 OhmRS485 120 Ohm, jumper enable / disable
Performance
Speed up to 921.6Kbps
Max. no. of ports Unlimited
Configuration
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ Assigned by System
I/O address Assigned by System
Available modes
RS232 full duplex
RS422 full duplex
RS485 4 wire , full duplex
RS485 2 wire, half duplex, with echo
RS485 2 wire, half duplex, without echo
Power and Environment
Power requirement 430mA max.(+5V)
Operation temp. 0°C - 55°C
Dimension 135mm x 100mm
Operating Systems
Windows 2000 up to 7 VScom high performance serial driver, x86 and x64 Editions
Server 2000 to 2008 R2 VScom high performance serial driver, x86 and x64 Editions
Windows NT 4.0 VScom high performance serial drivercontrol panel applet
Windows 95, 98, SE, ME VScom high performance serial driver
DOS virtuell address driver and compatibility toolsreal DOS Com port emulation
OS/2 Supported by COM16 driver in recent system releasesThird party serial driver SIO.SYS available
Linux Kernel 2.6 and up: built-in supportPrevious kernel: VScom high performance real tty driver
div.UNIX configuration instructions

Referencia Descripcion
4441 4441
Si continuas utilizando este sitio aceptas el uso de cookies. más información