Cod: WLg-ABOARD/NP [H4] - Nombre: WLg-ABOARD

Acksys
WLg-ABOARD

WLg-ABOARD WiFi access point, Ethernet bridge & repeater (WDS)

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounte

Características destacadas

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration, alarm contact
  • 2-port auto-sensing 10/100 Base TX network interface
  • Dual DC insulated power supply input (+9VDC to +140VDC), POE IEEE 802.3af
  • Shockproof rugged IP 66 aluminum enclosure
  Ethernet link     2-port Ethernet 10/100 auto-sensing, waterproof Ultra-Lock® M12 connectors (D-coding), plug & play mode & auto MDI/MDIX cross-over    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, IEEE 802.11d support, dynamic Frequency Selection (DFS), "ClearVoice" band, transmission Power Control (TPC).    
    Data rate     Up to 108 Mbps (Super AG mode)  
    Channels   2.4 GHz (802.11b/g): 14 channels / 5 GHz (801.11a/h): 24 channels    
    Output power     Transmitter +20 dBm (TPC), +26 dBm with the [H4] option    
    Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b    
    Antennas   Two 2dBi 2.4 / 5 GHz antenna, N-type connectors, optional lightning surge protection    
    Modulation     OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK  
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control    
    Modes     Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported    
    Administration     Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM    
    Operating systems     Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Alarms   Relay output warning: power failure, WLAN connection failure, Watchdog or user defined (SNMP) 1 FORM B solid state relay, 60V 0.15A (M12 power supply connector)    
    Signaling   LEDs signaling for LAN, WLAN network activity, 10/100 mode, MAIN & AUX power supply, C-Key    
    Power supply   9-72VDC, insulated 9-36VDC or 36-140VDC, dual input (M12 connector) or POE (IEEE 802.3af)    
    Consumption   8W typical power consumption, 10W with the 400mW radio    
    Dimensions & weight   Shockproof rugged aluminum enclosure, (L: 80 x l: 175 x h: 57 mm), 820 g with antennas    
    Standards   MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (CEM), IP66 seal rating, E-marked (2004/104), EN 50155 (IEC 60571) / EN 50121-3-2, EN 50121-4 (railways)    
    Environment   Operating temperature : -25°C to +70°C, extended -40°C to +80°C with [H4] option (HR 0-99%), storage : -40°C to +100°C    

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, tramways, freighter ships, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.

 

It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C (extended -40°C to +80°C), shockproof and vibration proof, IP66 seal rating for protection against dust and water projections.

 

WLg-ABOARD/N is certified for railway applications (EN 50155 [IEC 60571] / EN 50121-3-2 / EN 50121-4); it is E-marked (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.

 

Topologies

 

Ordering information
    WLg-ABOARD/N [H4]   WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, dual DC power input from +9VDC to +72VDC, shipped with 2 dual band 2 dBi omni-directional (2.4 / 5 Ghz), one set of 2 meters cables (M12 to RJ45 and M12 to stripped cables)    
    WLg-ABOARD/NP [H4]     Same as /N with POE IEEE 802.3af (without power cable)    
    WLg-ABOARD/NI [H4]     Same as /N with a dual DC insulated power input from +9VDC to +36VDC and alarm contact (relay)  
    WLg-ABOARD/NPI [H4]     Same as /N with a dual DC insulated power input from +36VDC to +140VDC, POE IEEE 802.3af, alarm contact (relay)ALMOST END OF LIFE AND NOT RENEWED REFERENCE.    
    C-Key_M1   Save / Restore configuration key for the WLg-ABOARD    
    [H4] option   H4 means high power version (400mW) and extended temperature range (-40°C to +75°C)    
    WLg-ANT-LSP-N     Lightning Surge Protector 50 Ohms N-Type antenna 5 KA (0-6 GHz)    
    WL-PLT-1   4-point fixing plate with ground lug    
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X