Cod: WLg-SWITCH - Nombre: WLg-SWITCH

Acksys
WLg-SWITCH 3-in-1 combo- Rugged 8-port Ethernet switch, POE injector, WiFi AP - BRIDGE - REPEATER

WLg-SWITCH 3-in-1 combo: Rugged 8-port Ethernet switch, POE injector, WiFi AP / BRIDGE / REPEATER

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a comp

Características destacadas

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps

  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS

  • Web based configuration, SNMP administration

  • 8-port Ethernet 10/100 Base TX with PoE 802.3af injector 

  • Dual DC power supply input (+9VDC to +75VDC)

  • IP30 metal enclosure, DIN rail or panel mounting

   Ethernet Switch     8-port 10/100 Base TX Fast Ethernet interface, RJ45 connector, auto MDI/MDIX crossover, IEEE 802.3x full-duplex and half-duplex auto-adaptive, wire-speed reception and transmission, high performance lookup engine, automatic address learning and aging, 120W PoE PSE feature according to IEEE 802.3.af    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set    
    Radio data rate     Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps    
    Channels     13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws.    
    Output power     Transmitter +20 dBm (Optional 26 dBm)  
    Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b  
    Antennas     Two 2dBi 2.4 / 5 GHz antenna for diversity mode  
    Modulation     OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK    
    Security     64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control    
    Modes     Access point to build a WiFi network infrastructure, Bridge, Bridge router, fast roaming, Infrastructure & AD-HOC, BRIDGE ROUTER, rapid roaming (less than 50 mS)  modes are supported    
    Administration     Built-in WEB interface, SNMP V2c agent, ACKSYS NDM (Networking Device Manager). ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)    
   Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Protocols     Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …    
    Signaling     Led display for power supplies, LAN on each port & WLAN activity, radio receive level    
   Alarms     Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
    Power supply     Dual input, +9 to +75VDC, removable clamp cage terminal Device should be powered from a +48VDC power supply (130W) in the PoE PSE mode    
   Consumption     10 Watts maximum (PoE injector power consumption not included)    
    Dimensions & weight     L: 110 mm x W: 50 mm x H: 151 mm (4.33 x 1.97 x 5.94 inch), weight 650g (22.9 oz)    
    Environment     Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.

Both Switch and power injector are manageable that make it possible to offer advanced configuration.

 

WLg-SWITCH can be managed using a web browser or SNMP; the “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment, giving it a high availability.

 

WLg-SWITCH fulfills the most severe requirements in terms of operating environment: operating temperature from -25°C to +70°C (-4°F to 158°F), shock and vibration proof according to MIL-STD-810F standard, IP 30 seal rating.

Topologies

 

Ordering information
    WLg-SWITCH     3-in-1 combo: 8-Port Ethernet switch, WiFi Access Point / Ethernet Bridge / Repeater (IEEE 802.11a/b/g/h & super AG, 2.4 / 5 GHz operation), 8-port power injector (130W), shipped with two 2dBi 2.4 / 5 GHz antennas    
    C-Key_M1     Save / Restore configuration key for the WLg-Switch  
    WLg-RF400MW     High power radio option (26 dBm, 400 mW)  
    WLg-FIX-PLQ     Panel fixing metallic plate  
    CAB-RJ45-1M     1 meter Ethernet RJ45 cable, straight  
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X