WLg-xROAD/N

Características destacadas

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration
  • Auto-sensing 10/100 Base TX network interface
  • DC power supply input (+9VDC to +50VDC), POE IEEE 802.3af for /NP
  • Shock & vibration proof rugged aluminum enclosure, IP65 seal rating

Descripción

WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.

 

It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shock and vibration proof, protection against dust and water projections (IP65).

 

The product is E-marked (CE standard for electronic equipments installed aboard vehicles), and can thus be installed in full safety aboard of all on-road equipments.

 

Topologies

 

Ordering information
    WLg-xROAD/N   WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, power input from +9VDC to +50VDC, shipped with 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and 2 meters of Ethernet RJ45 cable    
    WLg-xROAD/NP   Same as above with the power over Ethernet option (IEEE 802.3af)    

Especificaciones Tecnicas

Ethernet link 10/100 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over
WiFi network Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks; "ClearVoice" band provides non-overlapping channels for fast data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on ATHEROS’s AR5414 (AR5006XS) chip set.
Data rate Up to 108 Mbps (Super AG mode)
Channels 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Output power Transmitter +20 dBm (TPC)
Sensitivity Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
Antenna One 2dBi 2.4 / 5 GHz antenna, RP-SMA connector
Modulation OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK
Security 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
Modes Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported
Administration Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM
Operating systems Windows, Linux, UNIX as well as any operating system supporting TCP/IP
Signaling LEDs signaling for LAN, WLAN network activity, 10/100 mode, power supply
Power supply DC power supply (+9VDC to +50VDC) or POE IEEE 802.3af (for the /NP model)
Consumption 3.6W typical power consumption, 4W for the /NP model
Dimensions & weight Shockproof rugged aluminum enclosure, (L: 115 x W: 64 x H: 35 mm), 370 g with the cable and without the antenna
Standards MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP65 seal rating EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)
Environment Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +80°C

Referencia Descripcion
WLg-xROAD/N WLg-xROAD/N WiFi access point, Ethernet bridge & repeater (WDS)
WLg-xROAD/NP WLg-xROAD/N WiFi access point, Ethernet bridge & repeater (WDS)
Si continuas utilizando este sitio aceptas el uso de cookies. más información