XL-Optical Bypass
Descripción
x-light ensures a safe communication even in case of device failure by optically bypassing the defective node so that a permanent data transmission is guaranteed. x-light is manufacturer and protocol independent so that it perfectly integrates into every network, regardless of the structure (ring or line). x-light is activated once the voltage is lower than the adjusted voltage level. Furthermore, the system can be controlled flexibly via the trigger input, e.g. in case of service or failures.
x-light provides highest availability in multi- or singlemode fiber optic networks. Additional features are a high temperature range, a redundant power supply, a cost effective solution because it needs no additional UPS (uninterrupted power supply) and it reduces service costs.
The stainless steel housing offers an extremely high degree of flexibility and safety for all kinds of indoor and outdoor applications. It can either be mounted onto a DIN EN rail or fastened onto the wall.
Especificaciones Tecnicas
Type | 50/125 MM-ST | 50/125 MM-SC | 50/125 MM-LC | 62,5/125 MM-ST | 62,5/125 MM-SC | 62,5/125 MM-LC | 9/125 SM-ST | 9/125 SM-SC | 9/125 SM-LC |
---|---|---|---|---|---|---|---|---|---|
Article no. | 01500 5021 | 01500 5023 | 01500 5024 | 01500 6221 | 01500 6223 | 01500 6224 | 01500 0931 | 01500 0933 | 01500 0934 |
FO-connector | ST | SC | LC | ST | SC | LC | ST | SC | LC |
Fiber type | Multimode 50/125 μm | Multimode 62,5/125 μm | Singlemode 9/125 μm | ||||||
Wavelength | 850 nm (±40 nm) 1310 nm (±40 nm) | 1310 nm (±40 nm) 1550 nm (±40 nm) | |||||||
Einfügedämpfung | ≤ 1,4 dB | ≤ 1,7dB | |||||||
Durability switch | 10 million | ||||||||
Switching speed | 15 ms max./4 ms typ./4 ms in a temperature range between +5 °C and +70 °C | ||||||||
Switching type | non latching | ||||||||
Switch-on delay | 5 s, 10 s, 20 s and/or 40 s, switchable by DIP-Switch | ||||||||
Threshold level | Between 10 V and 64 V switchable by DIP-Switch (1 V, 2 V, 4 V, 8 V, 16 V and/or 32 V) | ||||||||
RS485 Connector | 2 x 4-pin power supply / 4 pin failure relay and signal input | ||||||||
Status-LEDs | Power (green) / error (red) / ready (green) | ||||||||
Power supply | 10–64 VDC | ||||||||
Power consumption | 2,5 Watts | ||||||||
Failure relay | 25 VDC (1 A) / 60 VDC (0,3 A) | ||||||||
Operating temperature | –40 °C – +70 °C | ||||||||
EMC | EN61000-6-2/EN55022 Klasse B + A1 + A2 | ||||||||
Weight | 500 g | ||||||||
Dimensions | 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector) | ||||||||
Housing | Stainless steel, powder coated |
Referencia | Descripcion |
---|---|
XL-Optical Bypass | Optical Bypass PROTOCOL TRANSPARENT |
Documentacion | Datasheet |