Todos los productos de ER-Soft
ER-Soft

Todos los productos de ER-Soft


Todos los productos de ER-Soft


Acksys
 WaveNet-Ex

Código: WaveNet-Ex

WaveNet-Ex is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments as well as those where sparks and electric arcs occur.
  • Aluminum IP66 enclosure, ATEX & IECEx, group II (above-ground industries), category 2 (adapted to areas 1, 2, 21 & 22)
  • MIMO access point 300 Mbps, 802.11n dual band
  • Gigabit Ethernet network interface
  • Up to 3 intrinsically safe RF outputs (support any type of antennas)
    Ethernet link   1-port Ethernet 100/1000 base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, cable gland/RJ45 connector    
    WiFi network   Compliant to the IEEE 802.11a/b/g/n 2.4 / 5 GHz standards MIMO, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS),"ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power    
    Data rate   Up to 300 Mbps radio bit rate (2 streams, 150 Mbps per stream)    
    Channels   2.4 GHz: 14 channels in b/g, 7 channels in 11n / 5 GHz: 19 channels in a/h, 11 channels in 11n    
    Output power   Transmitter +20 dBm (aggregate mode)    
    Sensitivity   Receiver -92 dBm for 802.11a/g/n and -95 dBm for 802.11b    
    Antennas   Up to 3 intrinsically safe RF outputs: support any type of antennas    
    Modulation   OFDM, DSSS    
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control    
    Modes   Access point to build a WiFi network infrastructure, client to connect any Ethernet equipment to this network, MODBUS/TCP wireless gateway, Repeater, Mesh point (IEEE 802.11s), infrastructure, AD-HOC, client router, fast roaming (30 ms), WMM QoS, multicast and IGMP-Snooping modes are supported    
    Administration   Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM, serial port, Telnet/SSH, CLI    
    Signaling   LEDs signaling for LAN, WLAN network activity, 10/100/1000 mode (inside enclosure)    
    Power supply   230 VAC or 24 VDC or PoE    
    Consumption   8 Watts typical    
    Dimensions & weight   Enclosure weight: 6Kg Enclosure dimensions: 198 x 198 x 132 mm    
    Standards   II 2G Ex db [ia Ga] IIC T5 II 2D Ex tb IIIC T100° Db  Emission NF EN 55022, immunity NF EN 61000-6-2  
    Environment   Operating temperature: -40°C to +60°C Storage: -40°C to +80°C, Humidity: 5% to 95% (non-condensing)    

WaveNet-Ex

VScom
 VScom USB-16COMi-RM

Código: 650

Serial ports on USB allow further use of existing devices, even when the computer doesn't offer serial ports.The high speed serial port with the 128 byte FIFO allow high speed communication, even in heavy loaded systems. Unique features reduce the system
  • Metal case
  • Rackmount and DIN-Rail mountable
  • RS232/422/485 DB9 male ports
  • Speed up to 500/3000 kbps
  • built-in power supply
  Hardware Specifications
Serial interface 16 x RS232/422/485 configured by DIP switchConnectors 16 x DB9 male
Speed RS232: up to 500kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex, with echoRS485 2-wire, half duplex, without echo
Signals RS232: TxD, RxD, RTS/CTS, DTR, DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, RTS+/-, CTS+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
USB Interface USB 2.0 Self poweredBuilt-in power supply 110-240V AC 47-63 Hz, 25VA
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 built-in, 2.4 available)

VScom USB-16COMi-RM

Acksys
 WLg-SWITCH 3-in-1 combo- Rugged 8-port Ethernet switch, POE injector, WiFi AP - BRIDGE - REPEATER

Código: WLg-SWITCH

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a comp
  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps

  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS

  • Web based configuration, SNMP administration

  • 8-port Ethernet 10/100 Base TX with PoE 802.3af injector 

  • Dual DC power supply input (+9VDC to +75VDC)

  • IP30 metal enclosure, DIN rail or panel mounting

   Ethernet Switch     8-port 10/100 Base TX Fast Ethernet interface, RJ45 connector, auto MDI/MDIX crossover, IEEE 802.3x full-duplex and half-duplex auto-adaptive, wire-speed reception and transmission, high performance lookup engine, automatic address learning and aging, 120W PoE PSE feature according to IEEE 802.3.af    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set    
    Radio data rate     Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps    
    Channels     13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws.    
    Output power     Transmitter +20 dBm (Optional 26 dBm)  
    Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b  
    Antennas     Two 2dBi 2.4 / 5 GHz antenna for diversity mode  
    Modulation     OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK    
    Security     64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control    
    Modes     Access point to build a WiFi network infrastructure, Bridge, Bridge router, fast roaming, Infrastructure & AD-HOC, BRIDGE ROUTER, rapid roaming (less than 50 mS)  modes are supported    
    Administration     Built-in WEB interface, SNMP V2c agent, ACKSYS NDM (Networking Device Manager). ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)    
   Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Protocols     Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …    
    Signaling     Led display for power supplies, LAN on each port & WLAN activity, radio receive level    
   Alarms     Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
    Power supply     Dual input, +9 to +75VDC, removable clamp cage terminal Device should be powered from a +48VDC power supply (130W) in the PoE PSE mode    
   Consumption     10 Watts maximum (PoE injector power consumption not included)    
    Dimensions & weight     L: 110 mm x W: 50 mm x H: 151 mm (4.33 x 1.97 x 5.94 inch), weight 650g (22.9 oz)    
    Environment     Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-SWITCH

VScom
 VScom USB-16COM-M CBL

Código: 653

Serial ports on USB allow further use of existing devices, even when the computer doesn't offer serial ports.The high speed serial port with the 128 byte FIFO allow high speed communication, even in heavy loaded systems. Unique features reduce the system
  • Metal case
  • DIN-Rail mountable
  • RS232 2x DB62 female combi-ports
  • Speed up to 500 kbps
  • USB 2.0
  • 9-30V DC power adapter
  Hardware Specifications
Serial interface 16 x RS232Connector 2 x DB62 female, Adapters availableSpeed up to 500 kbpsSignals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
USB Interface USB 2.0 Self poweredExternal power supply 9-35V DCConnected by terminal block.Adapter 12V included.
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 built-in, 2.4 available)

VScom USB-16COM-M CBL

Acksys
 WLg-IDA-N WiFi access point, 2-port Ethernet bridge & WDS repeater

Código: WLg-IDA/N

WLg-IDA/N features a WLAN interface coupled to a 2-port Ethernet 10/100 designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.
  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration
  • Auto-sensing 10/100 Base TX network interface
  • PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
    Ethernet link     2-port Ethernet 10/100 auto-sensing; RJ45 connectors; plug & play mode & auto MDI/MDIX cross-over    
    WiFi network     Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set    
   Radio data rate     Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps  
   Channels     13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode) Number of channels may vary depending on local laws.    
   Output power     Transmitter +20 dBm (Optional 26 dBm)    
   Sensitivity     Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b    
   Antenna     One 2dBi 2.4 / 5 GHz antenna (RP-SMA connector) + one RP-SMA connector for an additional antenna (diversity mode)    
    Modulation     OFDM : BPSK, QPSK, 16QAM, 64QAM et DSSS : DBPSK, DQPSK, CCK    
   Security     64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control    
   Modes     Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & rapid roaming (less than 50 ms) modes are supported    
   Administration     Built-in WEB interface; SNMP V2c agent; ACKSYS NDM (Networking Device Manager). ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-IDA unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)    
    Operating systems     Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
   Protocols     Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …    
   Signaling     Led display for power supplies, LAN on each port & WLAN activity, radio receive level    
   Alarms     Relay output warning: power failure, LAN or WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
   Power supply     PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input (removable clamp cage terminal)    
   Consumption     4.5 Watts typical    
   Dimensions & weight     Shock & vibration proof metal enclosure (L: 110 x W: 150 x H: 120 mm), 570 g    
   Standards     MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (EMC)    
   Environment     Operating temperature: -20°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-IDA/N

VScom
 VScom USB-16COM-RM

Código: 640

Serial ports on USB allow further use of existing devices, even when the computer doesn't offer serial ports.The high speed serial port with the 128 byte FIFO allow high speed communication, even in heavy loaded systems. Unique features reduce the system
  • Metal case
  • Rackmount and DIN-Rail mountable
  • RS232 DB9 male ports
  • Speed up to 500 kbps
  • built-in power supply
  Hardware Specifications
Serial interface 16 x RS232Connector 16 x DB9 maleSpeed up to 500 kbpsSignals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
USB Interface USB 2.0 Self poweredBuilt-in power supply 110-240V AC 47-63 Hz, 25VA
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 built-in, 2.4 available)

VScom USB-16COM-RM

Acksys
 WLg-IDA-S Wireless RS232 - RS422 - RS485 serial device server

Código: WLg-IDA/S

WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer
  • Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps
  • 9-36 VDC wide range power supply
  • IEEE 802.11 a/b/g/h WiFi radio (2.4 / 5 GHz)
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
  • Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP)
  • TCP Client / Server, UDP & MODBUS/TCP support
    Serial link   Full RS232 / 422 / 485 serial interface, 250 Kbps    
    RS signals available   RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and –RX signals can be polarized with jumpers)    
    Cables connection   SUB D9 male connector for RS signals, 5-point removable terminal block for RS422/485    
    WiFi network   Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip-set, single channel rapid roaming (<50 ms)    
    Radio data rate   Up to 108 Mbps (Super AG mode)    
    Channels   13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)    
    Output power   Transmitter +20 dBm (TPC)    
    Sensitivity   Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b    
    Antennas   Two 2 dBi bi-band external antennas, RP-SMA connector    
    Modulation   OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK    
    Security   64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS)    
    Modes   Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication (ad hoc) or from access point    
    Administration   Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM, TELNET from the serial link    
    Operating systems   Windows, Linux, UNIX as well as any operating system supporting TCP/IP    
    Signaling   Led display for power supplies, serial & WLAN activity, radio receive level    
    Alarms   Relay output warning: power failure, WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal    
    Power supply   Dual input, +9 to +36VDC    
    Consumption   4.5 Watts typical    
    Dimensions & weight   Shockproof & vibration proof metal enclosure (L: 110 x W: 150 x H: 120 mm), 550 g    
    Standards   MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (CEM)    
    Environment   Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating    

WLg-IDA/S

VScom
 VScom USB-8COMi-M

Código: 648

Serial ports on USB allow further use of existing devices, even when the computer doesn't offer serial ports.The high speed serial port with the 128 byte FIFO allow high speed communication, even in heavy loaded systems. Unique features reduce the system
  • Metal case
  • DIN-Rail mountable
  • RS422/485 DB9 male port
  • Speed up to 3000 kbps
  • external power supply
  Hardware Specifications
Serial interface 8 x RS422/485 configured by DIP switchSpeed up to 3000 kbpsConnector 8 x DB9 male
Available Modes RS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex, with echoRS485 2-wire, half duplex, without echo
Signals RS422: Tx+/-, Rx+/-, RTS+/-, CTS+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
USB Interface USB 2.0 Self poweredExternal power supply 12V DC, 0.8Aconnected by terminal block
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 built-in, 2.4 available)

VScom USB-8COMi-M

Acksys
 WLn-LINK-OEM

Código: WLn-LINK-OEM-RJ/R

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.
  • Complete ready-to-use solution (access point, bridge, repeater, Mesh point) requiring no driver software
  • Small sized PCB (L: 103 x l: 57 x H: 20 mm)
  • WiFi IEEE 802.11a/b/g/n 3T3R & Gigabits LAN interfaces, radio bit rates up to 450 Mbps
  • Secure WiFi link
  • Available in industrial temperature range
  • Web based configuration, SNMP administration
  • Reduces TTM, design risk & cost
    Ethernet interface   1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, RJ45 or TTL Ethernet interface (HE10 connector)    
    Serial interface   One serial port (TTL level)    
    WiFi interface   1 radio IEEE 802.11 a/b/g/n, MIMO 3T3R, 2.4 / 5 Ghz    
    WiFi radio data rate   802.11a : 6, 9, 12, 18, 24, 36, 48 and 54 Mbps802.11b/g : 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps802.11n : MCS0-23, 3 streams (6.5 to 450 Mbps)    
    Operating frequencies   ISM : 2.4-2.483 GHz (up to 14 channels)UNII : 5.15-5.25 GHz (up 4 channels)UNII-2 : 5.25-5.35 GHz (up to 4 channels)UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)UNII-3 : 5.725-5.825 GHz (up to 4 channels)Supports DFS and TPC    
    Output power   Up to 24dBm (aggregate), depending on radio card model    
    Antennas   3 U.FL connectors    
    Security   IEEE 802.1x (RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, WEP    
    WiFi Modes   Access point, client, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, client router, WMM QoS, multicast, dynamic routing and firewall modes fully supported, fast roaming (less than 30 ms), redundancy (VRRP)    
    Administration   Built-in WEB interface, SNMP agent, administration software for Windows/Linux (ACKSYS NDM)    
    LEDs Signaling   Radio : quality and activity | Ethernet : link 10/100/1000 and activity | Power : on-off | Product diagnostic    
    Power supply   +5VDC (+/- 5%), 8 Watts typical    
    Dimensions & weight   Small sized PCB, L: 103 x l: 57 x H: 20 mm, approx. 50g    
    Standards   Radio module CE and FCC certified. WLn-LINK-OEM has to be certified in the final product.    
    Environment   Operating temperature: -20°C to +70°C or -40°C to +85°C (for extended temperature range model)Storage: -65°C to +100°C, Humidity: 5% to 95% (non-condensing)    
    Warranty   1 year    

WLn-LINK-OEM

VScom
 VScom USB-8COM-M CBL

Código: 652

Serial ports on USB allow further use of existing devices, even when the computer doesn't offer serial ports.The high speed serial port with the 128 byte FIFO allow high speed communication, even in heavy loaded systems. Unique features reduce the system
  • Metal case
  • DIN-Rail mountable
  • RS232 DB62 female combi-port
  • Speed up to 500 kbps
  • powered by USB
  Hardware Specifications
Serial interface 8 x RS232Connector 1 x DB62 female, Adapters availableSpeed up to 500 kbpsSignals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
USB Interface USB 2.0 Bus poweredNo external power supply
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 built-in, 2.4 available)

VScom USB-8COM-M CBL

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




*Al enviar el formulario consideramos que esta de acuerdo, con nuestra política de datos. Ver política de datos
X