Logo ER-Soft

Anybus Wireless Bridge II - Ethernet

Anybus Wireless Bridge II - Ethernet
Anybus® Wireless Bridge enables you create an industrial wireless connection between two points in an industrial Ethernet network.
Protocolos: PROFINET Ethernet/IP

Características destacadas

  • Use with point-to-point wireless Industrial Ethernet installations through hazardous or hard-to-reach locations
  • Use as an Access Point for up to seven clients
  • Eliminates the need for expensive or maintenance-heavy cabling
  • Bridges TCP/IP Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP and PROFINET
  • Unique method to handle interference disturbances
  • Effective range of up to 400 meters
  • Full compatibility with Anybus Wireless Bolt — a wireless product for machine mounting
  • Easy configuration via push button or web interface
  • Advanced configuration with AT commands
  • Simultaneous operation of Bluetooth and WLAN allowing for bridging and redundancy between the two networks
  • Conforms to wireless standards worldwide
  • Compatible with PROFIsafe requirements.
  • Rugged IP65 rated industrial design
  • Security features for a secure industrial operation
  • Starterkit available

Descripción

Anybus Wireless Bridge II - Ethernet

Anybus® Wireless Bridge enables you create an industrial wireless connection between two points in an industrial Ethernet network. This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and WLAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable. It provides an effective wireless range of up to 400 meters.

BRIDGING TCP/IP ETHERNET

The Wireless Bridge makes it possible to operate leading TCP/IP based industrial Ethernet networks, such as BACnet/IP, PROFINET, EtherNet/IP and Modbus TCP, over Bluetooth an WLAN 2.4 / 5 GHz.

POINT-TO-POINT OR MULTIPOINT

Point-to-point or multipoint Anybus Wireless Bridge is often used as an Ethernet cable replacement (point-to-point communication). But it can also be used as an access point for up to seven WLAN/Bluetooth clients.

Configuration

You can configure the Anybus Wireless Bridge by either accessing the built-in web pages or you can also use the push-button. Pressing sequences will configure the product. Instructions included.For advanced config it is also possible to use AT commands.

Bluetooth® Interface

  • Supports Bluetooth v4.0
  • Supports profiles: SPP, DUN PANU & NAP
  • Operates as an Access point or Client
  • Connects up to 7 Slaves as an Access point
  • Max throughput: 1 Mbps
                                                           

WLAN Interface

  • Supports Dual-Band WLAN 2.4/5 Ghz frequency
  • Conforms to IEEE802.11 a/b/g/d/e/i/h specification
  • Operates as an Access point or Client
  • Connects up to 7 clients as an Access point
  • Max throughput: 20 Mbps

Ethernet Interface

  • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support, SNMP user management and access control
  • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
  • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over

Technical specifications

Wired interface Ethernet 10/100 Mbit/s
Wireless communication WLAN (2.4/5GHZ) or Bluetooth (interchangeable with same hardware)
Dimensions (L•W•H) 91 x 66 x 36.2mm or 3,58 x 2,60 x 1,42"
Weight  120g or 0,26 lbs
Operating temperature -30 to +65 °C or -22 to +149 °F (Storage temp: -40 to +85 °C )
Antenna gain Internal: 2.4 GHz: max 2dBi. 5 GHz: 0.5 max dBi
External: Max 3 dBi
Power supply  9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
Power consumption
 0.7W idle, 1.7W max
Enclosure material Plastic PC/ABS (Bayblend FR3010)
Mechanical rating  IP65
Mounting Two screws (Ø 4 mm) on flat surface. DIN rail mount option available (optional accessory).
Effective range   400 meters
Configuration  Three different methods:
• Accessing the built-in web pages in the product
• Using Easy Config modes (via push button or inside web interface)
• Sending AT commands
Connectors 1x M12 for Ethernet (4-pin, D-coded).
1x M12 for Power 5-pin, A-coded)


CERTIFICATIONS 		 
Europe ETSI R&TTE / EN 300 328 V1.9.1 (2015-02), EN 301 893 V1.8.1 (2015-09)
USA  FCC 47, CFR part 15
Canada ICES 003
Japan MIC (pending, pre certified radio module)
Taiwan  NCC (pending, pre certified radio module)
South Korea KCC (pending, pre certified radio module)
ATEX ATEX/IECEX Category 3, zone 2 according to EN 60079-0 and EN 60079-7 (Pending)
UL-Haz.Loc  UL & cUL Class 1 Div 2 (Pending)
WLAN Security  WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.
Bluetooth Security  Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved


Ordering information

Order Code 

AWB3000  (WITH INTERNAL ANTENNA)

Order Code 

AWB3010  (WITH EXTERNAL ANTENNA)

   
Included components  

Quick start guide, manuals. (Power supply not included)

  
Optional Accessories

Order Code: 023040
Cable kit. 1.5m Ethernet cables M12/RJ45 and power supply (world).

  
  Order Code: 024700
IP67 M12 connector kit for power and Ethernet, with screw terminals

  
  Order Code: 024701
DIN clip with screws 

  
  Order Code: 024702
Replacement external antenna. Foldable, dual band. RPSMA connector

  
  1.04.0085.00000
Magnetic antenna foot with 1,5 m cable and RPSMA connector, excl. antenna.

  
 

1.04.0085.00003
Screw-mount antenna base with 1,5 m cable and RP-SMA connector, excl. antenna 

  
Guarantee          3 years   

Get the Wireless Bridge Starterkit

Order Code

AWB3300

  
Included components

Two Wireless Bridges, Two Power Supplies (world), cabling, Quick Start Guide. 

  

Referencia Descripcion
AWB3000 Anybus® Wireless Bridge enables you create an industrial wireless connection between two points in an industrial Ethernet network.
Si continuas utilizando este sitio aceptas el uso de cookies. más información