Anybus PROFIBUS to .NET gateway

Características destacadas

  • System for connecting one or multiple PLCs to IT/software systems
  • Send and receive data from each side
  • Machine / PLC programmer is in full control – PLC access via PROFIBUS or Ethernet slave interface
  • IT style interface : customized names, receive events and post structured data via C# / .NET interface
  • Automated configuration – system generates fully customized C# API and PLC configuration (GSDML etc)
  • Names and data types according to parameter list agreed between software programmer and PLC programmer
  • Configuration is stored in C# program on customer side
  • In the event of a replaced gateway hardware, the system will automatically restore the configuration onto the new hardware
  • Robust industrial design for optimized cabling, DIN-rail or wall mount options
  • Global free technical support and consultancy

Descripción

The Anybus PROFIBUS to .NET gateway enables factory-floor data from PROFIBUS to be presented to .NET applications.

As a .NET programmer, you can get data directly from a PLC system and use this data in applications for statistics, analysis or maintenance.

The gateway can be used with a wide range of use cases, from simple transfer of KPI values, advanced messages with structured data types, or ultra-fast transfer of I/O data for “big data.”

CONFIGURATION

The information exchange between the Operational Technlogy (OT) side and the Information Technology (IT) side is defined in a spreadsheet template.

The HMS code generator will then automatically create a customized high level C# API (events and Post methods) that is easy to integrate directly into your .NET application. At the same time, a customized GSDML file is created that simplifies the integration in the PLC.            

For the IT Specialist - .NET Programmer

Significantly reduced integration complexity!

  • No need to understand industrial networks – Data from factory floor sent in intelligible format
  • IT style interface: customize names, receive events and post structured data via C# / .NET interface
  • Automated configuration – system generates fully customized C# API
  • Names and data types according to parameter list agreed with PLC programmer
    Configuration is stored in C# program 
 

 

For the Automation Specialist - .PLC Programmer

Function block simplifies PLC integration!

  • You are in full control – PLC access via PROFIBUS slave interface
  • Automated configuration – system generates fully customized GSDML file
  • Names and data types according to parameter list agreed with software programmer 
  • If a gateway needs to be replaced, the system will automatically restore the configuration onto the new hardware
     

PROFIBUS Slave interface

PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC. 

  • Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
  • Supports Class 1 & Class 2 services
  • Automatic baudrate detection up to 12Mbit/s
  • Supports PA baud rate 45.45 kbit/s
  • Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 328 bytes total (in+out)
  • Acyclic User Parameter data / Diagnostics length - up to 237 bytes
  • Supports PROFIBUS features: Sync and Freeze and Watchdog
  • PROFIBUS slave settings via on-board switches or vis .GSD file
  • 1x D-sub 9-pin female PROFIBUS connector
Order Code AB9071                                          
Included components Anybus PROFIBUS to .NET gateway          (Power supply not included)  
Guarantee3 years  

Especificaciones Tecnicas

Dimensions (L•W•H) 110 x 35 x 101 mm or 4,33 x 1,38 x 3,98"
Weight160g or 0,35 lbs
Operating temperature-25 to +70 °C or -13 to +158 °F
Storage temperature -40 to +85 °C or -40 to +185 °F
Power supply24 VDC
Current consumption Typical 150mA
USB portFor firmware upgrades
SD memory card slot For backup, configuration and easy replacement
PC connector1x RJ45
Fieldbus/Ethernet connector(See the secondary network interface details above)
Galvanic isolation On both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard) or Wall Mount (optional)
CertificationsCE, CULUS, ATEX/Haz.Loc

Referencia Descripcion
AB9071 Anybus PROFIBUS to .NET gateway
Documentacion Datasheet
Documentacion Installation Guide
Si continuas utilizando este sitio aceptas el uso de cookies. más información