Anybus X-gateway – EtherNet/IP Scanner - Modbus Plus Slave

Características destacadas

  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Powerful Scanner interface eliminates the need for a PLC controller on the EtherNet/IP network
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

Descripción

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between EtherNet/IP and Modbus Plus networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Scanner on the EtherNet/IP network and a Slave on the Modbus Plus network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

EtherNet/IP Scanner/Master interface

An Anybus X-gateway with an integrated EtherNet/IP Scanner interface can be used when there is no existing EtherNet/IP controlling PLC. The X-gateway will perform EtherNet/IP Scanner functions.

    • EtherNet/IP CONFORMANCE TESTED™ by ODVA 
    • Connects up 64 EtherNet/IP Adapter/Slaves
    • 10/100Mbit operation in full or half-duplex
    • Max. 509 bytes Input and 505 bytes Output data
    • Optional Live List of the active status of the connected adapters
    • Integrated FTP server provides easy file management using standard FTP clients.
    • Web server with dynamic data capability and Server Side Include (SSI) capability
    • Email client with dynamic data capability and Event-triggered email handling
    • Support for CIP Objects
    • DNS Capability
    • TCP/IP settings via on-board DIP switches, DHCP/ARP/Anybus IPconfig (HICP)
    • EtherNet/IP Scanner/Adapter network configuration via in-built web interface or RSLogix/Studio5000 software 
    • 1x RJ-45 Ethernet port

    Modbus Plus Slave Interface 

    Modbus Plus address settings made via on-board DIP switches

    • Complete Modbus Plus slave functionality
    • Up to 32 words of global (cyclic I/O) data in each direction
    • Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
    • Point-to-point parameter data (up to 125 words)
    • Onboard Node ID and Source ID switches
    • Modbus Plus baudrate 1 Mbit/s
    • 1x D-sub 9-pin female network connector
    Order Code  AB7679
    Price groupC
    Included components             Resource CD, USB configuration cable, Quick start guide, manuals.  Anybus Configuration Manager software. Anybus OPC server software. (single-piece only) For bulk pack orders,all configuration software can be downloaded under "files and documentation" from this website. (Power supply not included)
    Optional Accessories *Extra wide DIN-clip for flat mounting (Order Code SP1784) Anybus IPconfig Tool - Utility for module TCP/IP configuration (Windows 32/64-bit)  Downloadable under "Files and Documentation"
    Guarantee3 years 

    Especificaciones Tecnicas

    Dimensions (L•W•H) 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight400g or 0,880 lbs
    Operating temperature-25 to +65 °C or -13 to +149 °F
    Storage temperature-40 to +85 °C or -40 to +185 °F
    Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
    Current consumption max. 400mA (Typical 200mA)
    Enclosure material Aluminium and plastic
    Installation positionVertical / Flat*
    Galvanic isolationYES, on both BUS/Ethernet side
    Mechanical ratingIP20, NEMA rating 1
    MountingDIN-rail (EN 50022 standard)
    I/O configurationvia USB port with Anybus Configuration Manager software
    CertificationsCE, CULUS, ATEX/Haz.Loc

    Referencia Descripcion
    AB7679 Anybus X-gateway – EtherNet/IP Scanner - Modbus Plus Slave
    Si continuas utilizando este sitio aceptas el uso de cookies. más información