CAN-CR210/FO
Características destacadas
- DIN-Rail backbone bus to line up and connect the devices easily
- Fiber optic enables transmission in areas with high electromagnetic disturbances
- Increased system reliability
- Almost no influence on real-time behavior
Descripción
Stackable converter from
ISO 11898-2 to fiber optic cable
For creating star or tree topologies, several CAN-CR210/FO can be connected to a CAN-hub via the integrated backbone bus (also in conjunction with CAN-CR200).
One special feature of the repeater is, that it separates a defective segment from the rest of the network, so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
Technical specifications
| Display | Transmit and defective segment (three duo LEDs), Power (one LED) |
| CAN bus interface | ISO 11898-2, Sub-D9 connector. CAN termination resistors are integrated (switchable). Integrated backbone bus. |
| FOC connection | 2 x F-SMA or ST terminal for duplex line (Glass 50/125 µm duplex) |
| Baudrate | Up to 888 kbps |
| Delay | ~300 ns (translates into ~60 m (~90ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m) |
| Power supply | 9-35 V DC, 1.5 W typ., through terminals |
| Galvanic isolation | 1 kV, 1 sec.; CAN 1 |
| Certification | CE, FCC |
| Temperature range | -20 ºC ... +70 ºC |
| Housing, size | Plastic enclosure, 22.5 x 100 x 115 mm (without FO connector) |
Contents of delivery
- CAN-CR210/FO, Quick reference
Accessories
- T bus connector for creating star / tree topologies
Order number
| 1.01.0068.45010 | CAN-CR210/FO - Glass fiber version with F-SMA connector |
| 1.01.0068.46010 | CAN-CR210/FO - Glass fiber version with ST connector |
| 1.04.0073.00000 | T bus connector |
Related products
Especificaciones Tecnicas
| Display | Transmit and defective segment (three duo LEDs), Power (one LED) |
| CAN bus interface | ISO 11898-2, Sub-D9 connector. CAN termination resistors are integrated (switchable). Integrated backbone bus. |
| FOC connection | 2 x F-SMA or ST terminal for duplex line (Glass 50/125 µm duplex) |
| Baudrate | Up to 888 kbps |
| Delay | ~300 ns (translates into ~60 m (~90ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m) |
| Power supply | 9-35 V DC, 1.5 W typ., through terminals |
| Galvanic isolation | 1 kV, 1 sec.; CAN 1 |
| Certification | CE, FCC |
| Temperature range | -20 ºC ... +70 ºC |
| Housing, size | Plastic enclosure, 22.5 x 100 x 115 mm (without FO connector) |
| Referencia | Descripcion |
|---|---|
| 1.01.0068.45010 | CAN-CR210/FO |
| 1.01.0068.46010 | CAN-CR210/FO |
| Documentacion | Datasheet |